Posted on

Tips for Hatching Shipped Eggs.

Let me preface this post by saying, I’ve hatched out a lot of shipped eggs. Honestly, more than I would care to remember. `In our area, the breeds that seem to be most common are Easter Eggers, Sebrights, and OEGBs. They’re wonderful breeds and in fact, we still have EEs and an OEGB, but after a while of keeping chickens, I started wanting something a little different. My mom says, “Don’t tell her it’s unusual, hard to find, or hard to hatch, cause she’ll want it!” So, for real, don’t tell me πŸ˜‰

At times, I’ve saved a lot of money adding new breeds to our flock by purchasing eggs, and other times. . . not so much. Hatching shipped eggs is always a gamble as there are so many variables that can affect their viability such as: rough handling during shipping, x-ray machines, changes in air pressure, exposure to extreme temperatures, etc. Even though I regularly have 100% hatch rates with our own eggs, I usually only expect to have 40-60% with shipped eggs (the best I’ve ever had with shipped eggs was 97% and the worst is, of course 0%). Anyways, we sent off a shipment of eggs to my Uncle Paul and Aunt Paulette last week, so I thought I would do a post with my tips on hatching shipped eggs for anyone that is interested. Keep in mind these tips work for me, but they may not for anyone else. So here goes:

Shipping. Try to avoid having eggs shipped to you from the other side of the country, during months with extreme temperatures, and during inclement weather. I live in south Alabama, so I usually stick to purchasing eggs from reliable sellers in the Southeast. I also try to avoid buying eggs during the extremely hot summer months (July and August) and the much colder winter months. Another thing to consider is to not purchase eggs if you know there is any approaching bad weather coming your way or towards the seller (such as a hurricane, tropical storm, etc) as it may cause your eggs to be delayed along the way.

Unpacking eggs.

Cracks. Once your eggs have arrived, carefully unpack them and examine each one (preferably candling them). If any of the eggs have hairline cracks, you can try melting candle wax and dripping it on to the crack to seal it. This doesn’t always work, (in fact, I’ve only ever had one chick to successfully hatch out from a repaired egg), but  my belief is that it doesn’t hurt to try. Keep in mind, though, that you will need to be on guard for possible bacterial problems. Should the sealed egg develop a blood ring, begin to smell, or seep fluid immediately remove it from the incubator (Believe me, you don’t want to leave it in and risk the chance of it exploding – cause that has got to be the worst smell ever!).

The Bloom. I don’t wash hatching eggs – Ever. Eggs have a protective coating called a bloom that works to keep out bacteria. Washing them removes that. If any eggs have dirt on them, I very lightly rub it off with a paper towel.

Settling. Allow the eggs to sit upright in an egg carton (large end up) for 24 hours at room temperature (in fact, I set them out in the same room that the incubator is in).

Calibrating. Make sure your hygrometer is calibrated. Here’s how to do it:

Location. Location. Location. You wouldn’t think it, but location is a big part of incubating eggs – particularly if you’re using a still air incubator. Make sure your incubator is located away from drafts, direct sunlight, and in a room that isn’t prone to temperature fluctuations. I prefer the room my incubators are in to be kept at about 75-76F degrees, but living with my grandmother who doesn’t believe in using the AC, that rarely happens πŸ˜‰

Damaged Air Cells. Air cells are basically a small pocket of air located on the large end of an egg. One of the most common problems you’ll encounter with shipped eggs is damaged air cells. Rough handling during shipping will cause the air cell to become misshapen, detached, etc. To combat this and give the air cells a chance to settle, I place the eggs in the incubator upright (large end up) in the automatic turner or in an egg carton and I don’t turn them for at least the first 4-7 days of incubation, depending upon how badly they’re damaged.

Turning. After those first 4-7 days of not turning the eggs has passed, it’s now time to reverse course and start turning them. If you have an auto turner, that’s great . . .sit back and let it do the work for you. If you don’t, then make sure to turn the eggs an odd number of times each day. When I hand turn shipped eggs (which I always do with waterfowl and sometimes with other birds like peafowl), I do it one of two ways, depending upon how badly damaged the air cells are and what type of bird it is. The first option (and the way I usually do waterfowl) is the normal hand turning method – I mark each egg with an X on one side, then I lay the eggs on their side in the incubator and turn them by rotating til the opposite side is facing up. The second option for hand turning is the method I use if the air cells are really badly damaged – I set the eggs upright (always large end up) in an egg carton in the incubator and use a block of wood underneath the carton to tilt them from side to side (similar to how an auto turner works). I don’t have to enlist the second method as often anymore, simply because almost all of my incubators have auto turners now. And before I forget, when hand turning I also keep a small dry erase board by the incubator to keep track of how many times I’ve turned the eggs that day.

A candled egg.

Candling. The first hatch I ever did, I almost literally candled everyday. Not surprisingly, that hatch was completely unsuccessful. . . not a single chick hatched. I learned my lesson and now, I usually candle at day 7, day 14, and the day the eggs go on lockdown. [For one of my favorite resources, complete with lots of pictures of candled eggs, click here.] This is what I use for candling, but a cheap LED flashlight works just as well. It’s best to handle the eggs as little as possible lest you risk the transfer of bacteria to them or even accidentally dropping them (No matter how careful you are, there’s always the chance that an accident can happen – Case in point, I once knocked over an entire incubator full of guinea eggs πŸ™ ) When you do handle the eggs, wash your hands thoroughly and ensure they’re completely dry beforehand.

Lockdown. Three days before your eggs are due to hatch, they should be placed on lockdown. Lockdown means exactly what it sounds like. You don’t open the incubator. At all. Opening the incubator will cause the humidity to quickly drop at a time when you want it to be high to enable the chicks/poults/ducklings/etc to hatch out successfully.

Humidity. When you put eggs on lockdown, you also have to bump up the humidity. Now, living in a fairly humid area, I usually don’t have any problems keeping the humidity at an appropriate level during the main part of incubation, but I do have problems keeping it high enough in my Brinsea Octagon 20 during lockdown. To combat that, I place a wet sponge in the incubator (see in picture below). Remember, it’s the surface area not the depth of water that increases humidity.

Dry and fluffy turkeys.

Pip. Zip. Hatch. There are three main parts of the hatching process. First, a chick (or poult or whatever it is you’re incubating πŸ™‚ ) will make a tiny hole through the eggshell (this is the pip – there’s also internally pipping, but for now we’re just talking about the stages you might be able to witness through your incubator window). They’ll usually rest for a while after that (after all, it’s hard work making your grand debut into the world). . . although some are in a hurry and burst on out into the world not long after. Others take their sweet time – in fact, it’s not unusual, 24 hours later, to still be waiting on the next stage to begin. But during this time, the chick is not just resting, it’s also making it’s final preparations to enter the world, such as absorbing the yolk, allowing the blood vessels to dry up, etc. Which brings us to the next stage. . . zipping – the chick will begin to break through the shell all the way around the egg. Almost like it’s unzipping it. Once the chick has zipped all the way around the eggshell, they’ll usually hatch fairly quickly. . . which is our third stage. The chick will hatch out wet and not at all like the cute, fluffy little things people usually associate them with. They may even have bits of eggshell or even an umbilical cord attached (and if they were in a real hurry to hatch as some of mine have been, even an occasional unabsorbed yolk). Have no fear, give them a little time and the chicks will dry out and fluff up.

Eggtopsy. Now, once your hatch is over, you’ll most likely have eggs that didn’t make it. By eggtopsying those eggs, you might be able to gain some clue as to what went wrong or at the very least ensure that those leftover eggs really aren’t going to hatch before you toss them. Believe it or not, I actually had eggs that I was eggtopsying (5 days after the last egg had hatched), and one of them contained a chick that was still alive. Needless to say, that egg was quickly put back into the incubator and successfully hatched out the next day. [For a great resource on Eggtopsies, click here. . . Warning: Graphic Pictures!]

Whew! What a long post!

3 thoughts on “Tips for Hatching Shipped Eggs.

  1. Thank you for your wonderful information! I just had bantam faverolles eggs arrive yesterday and this will be my first attempt at hatching (I am also into rare heritage breeds and bantam favs are SO rare here in Canada). The air cells were intact but wobbly and had some irregularity to the shape. Have them in the bator now and will keep the turner off for the 4 days you recommend (or do you suggest more for these wobbly cells). I feel like a broody mama that’s for sure!

    1. So glad my post has helped you πŸ™‚ Four days without turning ought to be just right for the air cells to settle. Best of luck and hope you have a fantastic hatch!!!

  2. This has also helped me enormously along with others advice. 18 total eggs sent, 12 had moderate air cell issues. I followed this advice and all started…yep 100%. And I followed this through….3 weeks of spinning slightly leaned eggs in place in the egg carton- I’ve been obsessed like a mad woman but these eggs were EXPENSIVE. Well I just candled them for lockdown. I lost 3 air cell eggs and the rest are doing well. 6 of the eggs with lesser air cell problems are totally healed and safe to lay on their sides (though they will bear watching as they are slightly irregular in shape).

    I traced the air cells on all the ICU eggs and those that aren’t completely healed I put a bit of paper towel in the bottom of the egg cups of the egg carton and placed them in there leaning at a 45 degree angle or a little less with the majority of the air cell space facing up. The paper towel just is to disturb the perfect fit of the egg in the cup and to give more room for pipping without being blocked by something but still be stable enough for chick movement and hatching. I got these eggs when it was still fairly cool-ish here and it was definitely cool where they came from…so I think the excellent hatch rate has something to do with the eggs not starting on the way here. Fingers crossed that we can get them all out alive and well…that is all that is left now.

    Another tip- There is a patented egg sterilization method that involves using 3% hydrogen peroxide either sprayed on the eggs thoroughly or the egg dipped into it right before you put them in the incubator. The peroxide kills bacteria and germs….and it apparently raises the oxygenation of the chick (I think that is because that same bubbling action we see when using it on us goes on at a microlevel and cleans out the pores of the egg from guck that has lodged in them that we can’t see). Anyway I treated my eggs with that as well and as you can see they did very well.

Thank you for visiting my blog! I enjoy reading each and every comment!

This site uses Akismet to reduce spam. Learn how your comment data is processed.